Henan Sinofiltec Technology Co.,Ltd
Model No.: FST-AUTO-EL series
Type: Ozone Water Purifier
Motive Force: Electric power
Style: Network Type
Performance: Efficient Filtration
Packaging: Plywood box or standard export packing
Productivity: 1000 PCS/YEAR
Place of Origin: XINXIANG, CHINA
Supply Ability: 100PCS/MONTH
HS Code: 8421999090
Automatic Self cleaning Strainer (FST-AUTO-EL series):
Automatic Self-Cleaning Brush Filter filtration process: The medium flows from the inlet into the filter and through the wedge mesh filter, and then the clean water flows out of the outlet.When impurities accumulate on the inner surface of the Wedge Screen Filter Cartridges to form a filter cake,At the same time, a pressure difference between the inside of the screen and the outside of the screen is gradually formed.
Automatic Self-Cleaning Recycle Filters :When the differential pressure reaches the default value, the signal is sent to the PLC (program logic control) through the differential pressure switch. When the PLC drives the motor, the shaft starts to rotate, and the rotating brush can remove the impurities on the inner surface of the screen.At the same time, the PLC is opened by the drain valve, and impurities are discharged from the drain valve through the internal pressure of the system.
Strainer Body: Carbon Steel(Bituminous Epoxy Paint, Epoxy Coating ); Stainless Steel.
Screen: Stainless Steel, Other special material.
Shaft Components: Stainless Steel, Nylon,PVC.
Drain Valve: Cast lron, Brass, Stainless Steel.
①Short self-cleaning time and small pressure loss.
②Through the finite element analysis, the brush shaft, which is the critical component, obtains the better structure, and strength.
③Inteligent control(PLC), high degree of automation
④ Suit for various of raw water qualities and requirements
⑤ Less vulnerable parts, no consumables, less running costs
⑥Self-cleaning with continuous flow
Product Technical Parameters:
1. Flow rate of one piece: 25-2800 m3/h, more discharge can be achieved by more pieces in parallel connection
2. Maximum operating temperature:70 C, products can be customized for higher temperature.
3. Filtration fineness:100-4500 micron.
5. Minimum operating pressure:0.1MPa.
6. Cleaning time:15-60s, cleaning time is set according to actual conditions.
7. Loss of pressure in cleaning:0.01MPa.
8. Control mode: manual, pressure difference or time control.
9.0perating voltage: Three-phase AC 220/380/440V 50/60Hz.
EL strainer installation schematic:
Copyright © 2019 Henan Sinofiltec Technology Co.,Ltd All rights reserved.